A Research on the Optimization of Order-Splitting Model for Small and Medium sized Custom Furniture Enterprises An Empirical：Analysis Based on In-depth Interviews
DOI:
https://doi.org/10.24191/idealogy.v11i1.890Abstract
This study focuses on the models and processes of order splitting in six small and medium-sized custom furniture companies in China. Through a literature review to identify the shortcomings of existing research and in-depth interviews with six small and medium-sized custom furniture companies, this paper analyses the main pain points and optimisation paths of the order splitting process. The study found that small and medium-sized enterprises have problems with order processing, such as insufficient information technology, a lack of standardised modules, and inefficient cross-departmental collaboration. These problems, to varying degrees, have led to a poor customer experience, resulting in a negative overall reputation for the industry and a high rate of customer complaints, which in turn have affected the industry's overall development. Based on the results of qualitative and visual analysis, this paper proposes practical suggestions for improving the order splitting model. This study not only fills the theoretical gaps in the production and management of the custom furniture industry but also provides empirical evidence for improving the customer experience and operational efficiency of enterprises.
Keywords: Customised furniture, Split order model, Small and medium-sized enterprises, Process optimisation, Customer experience.
References
Cai, X., Mokhtar, S., & Zhou, W. (2024). Modular System of Cabinets for Mass-Customized Furniture. Environment -Behaviour, 67–73. https://doi.org/https://doi.org/10.21834/e-bpj.v10iSI29.6903
Guo, C. (2018). Development and Application ofIntelligent Warehouse System forBoard Style Furniture [Master Thesis]. South China Agricultural University.
Hui, X. (2019). Status Analysis of Design and Production Integration in the Customized Furniture Industry. Furniture, 40(3), p.007-011. https://doi.org/10.16610/j.cnki.jiaju.2019.03.002
Institute, C. B. I. R. (2023). fig2. https://baijiahao.baidu.com/s?id=1751595772740753103&wfr=spider&for=pc
Li, Z. (2018). Application of Intelligent Manufacturing Technology in Customized Furniture Industry. Furniture, 39(4), p.106-110. https://doi.org/10.16610/j.cnki.jiaju.2018.04.027
Liang, L. (2021). Application of “Internet Plus” in Customized Furniture. Furniture, 42(6), p.8-12. https://doi.org/10.16610/j.cnki.jiaju.2021.06.002
Liu, H. (2021). Research on The Manufacturing Strategy of Custom Furniture in WS Company [Master Thesis]. In South China University of Technology. South China University of Technology.
Liu, W. (2022). Research on production planning system of panel cabinet furniture underthe theory of mass customization-taking company Licai as an example [Master Thesis]. LANZHOU UNIVERSITY OF TECHNOLOGY.
Ma, Z., Wu, Z., Wang, G., & Chen, J. (2021). Current Situation and Trend of Digital Manufacturing and Management of Cutom Furniture Enterprises. Furniture, 42(1), p.007-010，015. https://doi.org/10.16610/j.cnki.jiaju.2021.01.002
Ning, M. (2022). Research on Order Data Quality Improvement of A Cabinet Company [Master Thesis]. South China University of Technology.
Qian, Y. (2023). Construction and application ofpanel custom furniture engineering information system [Master Thesis]. Nanjing Forestry University.
Qin, M. (2023). Research on Problems and Strategies on Flexible Production Management of M Company [Master Thesis]. In Guangdong University of Technology. Guangdong University of Technology.
Shen, J. (2010). Small Furniture Enterprise Logistics Mode of Operation Research and Choice Analysis -In Chongqing as an example [Master Thesis]. Chongqing Jiaotong University.
Wang, G. (2024). Analysis of current situation and development of splitting software for digital manufacturing of panel furniture. Journal of Forestry Engineering, 9(3), 175–183. https://doi.org/10.13360/j.issn.2096-1359.202308015
Wang, Y. (2012). Study on Picking Task and Restocking Bufer Optimization of Parallel Automated Picking System [Ph.D.Thesis]. In Shandong University. Shandong University.
Xie, S. (2021). Research and application of large-scale custom furniture product development process [Master Thesis]. In South China Agricultural University. South China Agricultural University.
Xie, Z. (2019). Research on ERP Implementation in Small and Medium-sized Furniture Enterprises [Master Thesis]. Central South University of Forestry & Technology.
Xiong, X. (2020a). Automatic identification and intelligent sorting technology of customized home furnishing based on mixed production. Journal of Forestry Engineering, 5(6), p.162-167. https://doi.org/10.13360/j.issn.2096-1359.201911005
Xiong, X. (2020b). Digital design and manufacturing of furniture enterprises oriented to intelligent manufacturing. Journal of Forestry Engineering, 5(4), p.174-180. https://doi.org/10.13360/j.issn.2096-1359.201908017
Xu, B. (2020). New Pattern of Customized Furniture Market after the Opportunity Dividends’ disappearance. Furniture and Interior Decoration, 009(04), 9–10. https://doi.org/10.16771/j.cn43-1247/ts.2020.04.001
Yao, X. (2018). Autonomous smart manufacturing:Socialcyber-physical interaction ,reference architecture and operation mechanism. Computer Integrated Manufacturing Systems, 11(1), p.1-5. http://link.springer.com/10.1007/978-3-319-59379-1%0Ahttp://dx.doi.org/10.1016/B978-0-12-420070-8.00002-7%0Ahttp://dx.doi.org/10.1016/j.ab.2015.03.024%0Ahttps://doi.org/10.1080/07352689.2018.1441103%0Ahttp://www.chile.bmw-motorrad.cl/sync/showroom/lam/es/
Ying, L. (2019). The Innovative Application of Chaozhou Woodcarving Art in Furniture Design. PACKAGING ENGINEERING, 40(16), p.215-221. https://doi.org/10.19554/j.cnki.1001-3563.2019.16.034
Ying, L., Abidin, S. Z., & Vermol, V. V. (2025). Design and Development of Smart Elderly Care Apps in Henan, China. Idealogy Journal, 10(1), 172–183. https://doi.org/https://doi.org/10.24191/idealogy.v10i1.710
Zhou, Y. (2015). Research and Application of Make-to-order Manufacturing in Plate Furniture Enterprises Based on SAP System [Master Thesis]. In Zhejiang A&F University. Zhejiang A&F University.
Downloads
Published
Issue
Section
License
Copyright (c) 2026 UiTM Press
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
UiTM Press (the Publisher) has agreed to publish the undersigned author’s paper in Idealogy Journal. The agreement is contingent upon the fulfilment of a number of requirements listed below.
1. The undersigned author warrants that the paper entitled below is original, that it is not in any way libellous or unlawful in Malaysia, that it does not infringe any copyright or other proprietary right. The undersigned hereby represents and warrants that he/she is the author of the paper, except for material that is clearly identified as to its original source, with permission notices from the copyright owners where required. The undersigned represents that he/she has the power and authority to sign and execute this agreement.
2. The undersigned author warrants that the paper entitled below has not been published elsewhere, and also it will not be submitted anywhere else for publication prior to acceptance/rejection by this Journal.
3. By submitting the paper entitled below, the undersigned author agrees to transfer the rights to publish and distribute the paper in an international e-journal (entitled above) to Publisher.
4. The undersigned author agrees to make a reasonable effort to conform to Publisher's submission guidelines and to liaise with the editor to ensure that the requirements of these guidelines are met to a reasonable degree.
5. The corresponding author signs for and accepts responsibility for releasing this material on behalf of any and all coauthors. This agreement is to be signed by at least one of the authors who has obtained the assent of the co-author(s) where applicable. After submission of this agreement signed by the corresponding author, changes of authorship or in the order of the authors listed will not be accepted.
